Ipod Features - SONIQ QPi600B Instruction Manual

iPod Features

iPod Dock Adapters
Before connecting your iPod, you need to install the
appropriate iPod Dock Adapters in the dock of the
unit. Below iPod Dock Adapters are included with the
unit.
iPods
iPod nano (1st generation)
1GB / 2GB / 4GB
5G iPod with video 30GB
U2 iPod with video 30GB
iPod classic 80GB
5G iPod with video 60GB / 80GB
iPod classic 160GB
iPod nano (2nd generation)
2GB / 4GB / 8GB
3G iPod nano with video
4GB / 8GB
iPod touch
8GB / 16GB / 32GB
Note: iPod mini cannot be supported.
Connecting your iPod
Warning: To prevent damage to the unit and/or your iPod,
connect or remove your iPod when the unit is powered off or the
unit is not in the iPod mode.
1. Ensure the appropriate iPod Dock Adapters is installed.
2. Insert your iPod into the connector in the dock.
3. Press the SOURCE button to select the iPod mode. your
iPod will be connected automatically, and iPod Home menu
appears.
Note:
• Your iPod will be charged automatically (until fully charged)
once it is connected, no matter whether the unit is in iPod mode or not.
• Make sure the software of iPod is the latest.
• The key HDMI will malfunction when the unit is in iPod mode.
Playing Music
1. In iPod Home menu, use the
2. Use the / button to select from Playlists, Artists, Albums, Songs, Genres or Composers. Press the OK
button to enter.
3. Use the / button to navigate the iPod menu lists and select songs, press the OK button to begin
playback. (you may also use the control wheel and keys on your iPod to operate it.)
• Press the
PAUSE button to pause, press the
• Press the
/ button to skip to the previous / next song.
• Press the
/
playback.
• Press REPEAT DISC button to select a repeat playback mode (a single repeat or all songs repeat). Press
again repeatedly to cancel this repeat playback.
4. Press the RETURN button to go back to the previous menu.
Dock Adapters
8
9
10
11
13
14
/ button to select Music and press the OK button.
button to begin fast reverse/forward, press the
Installing the iPod Dock Adapters
1. Choose a iPod Dock Adapters that fits your iPod.
2. Push to open the iPod docking door.
3. Place your iPod Dock Adapters into the dock until it
sits firmly in place.
Removing the iPod Dock Adapters
1. Remove the iPod Dock Adapters as shown.
2. Replace it with another one you need.
IMPORTANT: Before docking your iPod. Make sure
your iPod has the latest firmware.
Docking System for iPod
Welcom
PLAY button to resume.
- 16 -
iPod Dock Adapter
Music
Photos
Videos
Settings
PLAY button to resume normal
Home