Turning On The Unit - SONIQ QPi600B Instruction Manual

Setup and Connections
Note :
• When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment
from the wall outlet before making any connections.
• If the external equipment is television and this audio system is close to it, you may experience the interference
if the tuner function is selected while the television is working.
• Refer to the instruction manual of the connected equipment as well.

TURNING ON THE UNIT

1. Press the STANDBY/ON button to turn the unit ON, or
2. Press the STANDBY/ON button on the remote control or
in STANDBy mode.
3. Turn on the TV.
4. Select the channel on your TV corresponding to the VIDEO IN jack that the unit is connected to. See TV User
Guide for more information.
• If you have connected the unit successfully, the following start-up picture will appear on your TV screen.
Note:
Whenever no disc or disc stop for 60 minutes, the system will be turned to STANDBY mode automatically.
Sound System
Dolby Digital
Dolby Digital is a technology developed by Dolby Laboratories. Soundtracks encoded in Dolby Digital can
reproduce from one to 5.1 discrete channels of excellent quality audio.
The unit automatically recognizes the Dolby Digital bitstream and provides a downmix suitable for two-
channel listening. An additional Dolby Digital decoder is required for reproduction of the discrete multi-channel
soundtracks available on many DVDs.
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
PLAY button to turn on the unit while the unit is
- 10 -