Playing A Disc - SONIQ QPi600B Instruction Manual

Playing a Disc

This user manual explains the basic instructions for
operating this unit. Some DVDs are produced in a
manner that allows specific or limited operation
during playback. Therefore, this unit may not respond
to all operating commands. THIS IS NOT A DEFECT.
Please refer to the instructions accompanying the
Playing a Disc
1. Press the STANDBY / ON button to turn on the unit.
See CUSTOMIzING THE FUNCTION SETTINGS before proceeding to step 2.
2. Press the OPEN/CLOSE button to open the disc tray.
3. Place a disc onto the disc tray with the label side up.
4. Press the OPEN/CLOSE button to close the disc tray. It takes a short while for your unit to load the disc.
After loading, for most DVDs, the unit will automatically take you main menu or start playing.
5. If the unit does not automatically start playing the DVD, press the
Pausing Playback (Still Mode)
Press the PAUSE button on the remote. To resume normal playback, press the
Each time you press the
Stopping Playback
• Press the
STOP button at the location where you want to interrupt playback. To resume playback at the
position where the disc was stopped, press the
• If you press the
STOP button twice, the unit's memory will be cleared and pressing the
reset the disc to the beginning.
Fast Forward / Fast Reverse
1. Press the SEARCH
or SEARCH button, the playback speed changes in the following sequence:
PLAY FORWARD x2
FORWARD x20
2. Press the PLAY button when you reach the desired point to resume normal playback.
Note:
• The unit mutes sound and subtitles during reverse and forward scan of DVDs.
• The fast playback speed may differ depending on the disc.
Skipping to a Different Chapter/Title
• Press the
PREV button to go back to current or previous chapters/tracks.
• Press the
NEXT button to advance chapters/tracks.
• For audio CDs, use the number buttons on the remote control to jump immediately to the desired track
number.
Slow-motion Play
1. Press the SLOW button on the remote in play mode.
• Each time the SLOW button is pressed, the speed of slow-motion playback changes in the following
sequence:
SF 1/2 SF 1/3
2. Press the PLAY button to return to normal playback speed.
PAUSE button, the picture advances one frame.
or SEARCH button when a disc is playing. Each time you press the SEARCH
FORWARD x4
FORWARD x8
SF 1/4 SF 1/5
specific DVD in question for more information about
the options available on that DVD.
may appear on the screen during operation. It
means that the desired operation is not permitted by
the unit or disc.
PLAY button.
PLAY button.
PLAY BACKWARD x2
OR
BACKWARD x20
SF 1/6
- 11 -
PLAY button.
PLAY button will
BACKWARD x4
BACKWARD x8
SF 1/7 PLAY