Safety Precautions CAUTION WARNING: THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS RISK OF ELECTRIC SHOCK FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE DO NOT OPEN PLACED ON APPARATUS. WARNING: TO REDUCE THE RISK OF ELECTRIC WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK, DO NOT REMOVE COVER (OR BACK).
Important Safety Precautions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Disc Formats The unit can playback discs bearing any of the following marks: DVDs Audio CDs [8cm(3")/12cm(5") disc] [8cm(3")12cm(5") disc] Compatible Region Management Information Region Management Information: This unit is designed and manufactured to respond to the Region Management Information that is encoded on DVDs. If the region number printed on the DVD does not correspond to the region number of this unit, this unit cannot play that disc.
Remote Control Using the Remote Control Battery Replacement Take out the PVC sheet before • Point the remote control at the When the battery becomes weak, operating the Remote Control. REMOTE SENSOR located on the operating distance of the remote the unit.
Control Reference Guide DVD Player 1) Remote Sensor Receives the remote control signal. OPEN Button Press the OPEN button and hold the front panel to open the disc door. SEARCH Button Performs fast reverse playback. SEARCH Button Performs fast forward playback. PREV Button Goes backwards to previous chapters/tracks.
Power Supply A. Using the Car Power Adaptor The included 12V car power adaptor is designed for use with vehicles that have a 12V, negative ground electrical system. Using the DVD Player and the Monitor together DVD player Monitor - right side left side right side...
Connections A. Watching a DVD on the DVD Player and the Monitor you can watch the same DVD on the DVD Player and the monitor. DVD player Monitor - right side left side right side AV-DC cable (included) To A/V OUT & To A/V IN &...
Connections C. Connecting a Stereo Receiver or Amplifier (for the DVD Player Only) The DVD Player can play two channels Dolby Digital. DVD player Listening on External Audio Equipment right side 1. Connect the DVD Player to the left/right Audio In jacks on the other equipment using a standard Audio cable (not included).
Connections E. Using the Monitor with Other Equipment while Playing DVD on the DVD Player you can use a game console or other video equipment on the monitor while playing a DVD on the DVD Player. Game System / Video Equipment Monitor - DVD Player left side...
Mounting in the Vehicle Use the supplied mounting straps to install the DVD Player and monitor on the back of the vehicle's headrests. Tightly wrap the mounting strap around the headrest. Mounting the DVD Player Mounting the Monitor SAFETY WARNING! •...
Using the Stand for Desktop Use you can stand the DVD Player up on a desk or table using the stand on the back. Sound System Dolby Digital Dolby Digital is a technology developed by Dolby Laboratories. Soundtracks encoded in Dolby Digital can reproduce from one to 5.1 discrete channels of excellent quality audio.
Playing a Disc This instructional manual explains the basic instructions for operating this unit. Some DVDs are produced in a manner that allows specific or limited operation during playback. Therefore, this unit may not respond to all operating commands. THIS IS NOT A DEFECT. Please refer to the instructions accompanying the specific DVD in question for more information about the options available on that DVD.
Playing a Disc Subtitle Selection 1. While a DVD is playing, press the SUBTITLE button to display the current language setting, as shown in the example. 2. Press the SUBTITLE button repeatedly to select the desired subtitle language. you can turn subtitles off by pressing the SUBTITLE button repeatedly until the “...
Locating a desired section Locating a Specific Title If a DVD contains title numbers, you can locate a specific title by directly selecting its title number. 1. Press the GOTO button. 2. Press the corresponding number button(s) for the title you want. 3.
DVD Programmable Memory Playing TItles/Chapters in a Favourite Order you can combine your favourite titles/chapters and play them in the order you determine. 1. When a DVD is stopped, press the MEMORY button, the following display appears. 2. Select the items in the order you want by pressing the number buttons.Each time you press the Cursor buttons ( , ), the space is highlighted.
Viewing JPG files This unit can play JPG files recorded on a CD-R or CD-ROM disc (CD-RW is not recommendable). Viewing JPG Files 1. Open the disc door. 2. Hold a JPG file disc by its edge and gently push it onto the spindle with the label side facing up until you hear a “click”.
Customizing the Function Settings LANGUAGE OSD Language 1. Press the SETUP button in stop mode. 2. Press the button to select OSD Language. 3. Press the ENTER button, then the button to shift and change the Language. 4. Press the ENTER button. 5.
Customizing the Function Settings VIDEO Aspect Ratio 1. Press the SETUP button in stop mode. 2. Press the button to select Video. 3. Press the button, then the button to select Aspect Ratio. 4. Press the ENTER button, then the button to shift and change the aspect ratio.
Customizing the Function Settings RATING Parental Control DVDs are rated according to their content and some are equipped with a password function. The contents allowed by parental lock level and the way a DVD is controlled may vary from disc to disc. For example, if the disc allows, you could lock out violent scenes unsuitable for children or you could lock out playback of the disc altogether.
Customizing the Function Settings MISC Use Default Settings 1. Press the SETUP button in stop mode. 2. Press the button to select Misc. 3. Press the button, then press the button to select “Use Default Settings” dialogue box. 4. Press the ENTER button, then press the button to select “Yes”.
Troubleshooting Guide SYMPTOM CAUSE (AND REMEDY) No power. • Ensure the car power adapter is connected. • Make sure that the unit is turned on. remote control • Remove any obstacles between the remote and the unit. does not function. •...