Troubleshooting - Midland BR01 Instruction Manual

Troubleshooting

Problem
The radio doesn't switch on
The radio switches off shortly after it has been switched
on
The battery pack does not recharge
The radio switches on but is unable to receive signals
It is not possible to communicate with other parties
Reception is fragmented and/or disturbed
The autonomy of the battery pack is limited
10 |
Possible Cause
The battery pack is discharged and
correctly.
Discharged battery pack.
The battery-charger has not been c
rectly.
The site of installation is too shielded
The volume is too low
Incorrect CTCSS or DCS
An incorrect radio channel has been
The radio is installed in a shielded are
you are communicating with
Incorrect CTCSS or DCS
The signal is very weak.
The transmission distance is excessi
cles in the transmission path
Other parties are using the same ch
The radio has been installed too clos
interference (televisions, computers
Commission time is too high.
BR01 instruction guide