Advertisement
Setup Continued:
Info Menu:
1: In Main Menu scroll to INFO .
2: Quick Press "ON" to enter INFO Mode.
3: Use the 5or6 keys to toggle scroll through the various information screens.
4: Display a varity of information that may be useful to the user, or in some cases a valuable tool in
working out if the area meter doing that job you want it to do. There are also low level information
here that give insight into the correct operation of the computer system that makes this area meter
what it is. Information may prove to be a useful tool used during installation.
Screen 1:
Screen 2:
Screen 3:
Screen 4:
Screen 5:
Screen 6:
Screen 7:
Screen 8:
Screen 9:
Screen 10:
Screen 11:
Screen 12:
Screen 13:
Screen 14:
Screen 15:
Screen 16:
Screen 17:
Screen 18:
Screen 19:
Screen 20:
Screen 21:
Screen 22:
- Meter logo graphic
- Help desk info
- Distance travelled pulse detection timing and detection info screen.
- Meter model infomation.
- Firmware release info
- Hours that the meter has been running, powered up and calculating area.
- LCD contrast setting and backlight voltage on/off control state.
- Temperature of oil.
- Voltage level applied to the meter.
- Serial number.
- RUN HOLD voltage level. Reflects run hold state in twin floor confiuration.
- Software error detection. Should be all 0.
- PWR is the number of power ups that the meter has had.
- BOD may get counts, this is a low power detection.
- Auto save count down timer.
- Average speed.
- Time and distance calculator numbers.
- Real Time Clock/Calendar timer information
- Run Hold state number.
- Area calculator numbers.
- Time number.
- Real rate verse filtered rate.
- Area calculator numbers
- All motors rpm monitor screen
- States that options are on
- Calcs to work out rpm of chain motor
- Spinner rpm with target rpm and pwm settings
- Chain Left with target rpm and pwm settings
- Chain Right with target rpm and pwm settings
- Weight calcs
- Spinner rpm calcs.
- Chain Left rpm calcs.
- Chain Right rpm calcs.
- Variable used to calc the volume of the output slot of the spreader
- Extended variables to calc the weight out of the spreader and computed weight output by the
spreader for t rev of the chain motor
- Rate and how it is effected by the rate correction number
Page 19
Advertisement
