Advertisement
Area Menu:
1: In Main Menu scroll to AREA .
2: Quick Press "ON" to enter AREA Mode.
3: Use the 5 to display the following information types:
- AREA. Area amount for the current job.
- AREA SUB. Sub area total that can be reset any time.
- AREA Total. Area of all jobs done by the meter.
4: Use the 6 the key if the"Run Hold Mode" is Keys to switch the Field Mate into and out of Hold.
5: Quick press "ON to Exit to Main Menu.
Distance Menu:
1: In Main Menu scroll to DISTANCE .
2: Quick Press "ON" to enter DISTANCE Mode.
3: Use the 5 to display the following information types:
- DISTANCE. Distance travelled in RUN mode for the current job.
- DISTANCE SUB. Distance travelled in HOLD mode for the current job.
- DISTANCE TOTAL. Total distance travelled in HOLD and RUN mode for the current job.
4: Use the 6 key if the"Run Hold Mode" is "Keys", to switch the Field Mate
into and out of Hold.
5: Quick press "ON to Exit to Main Menu.
Speed Menu:
1: In Main Menu scroll to SPEED .
2: Quick Press "ON" to enter SPEED Mode.
3: Use the 5 key to display the following information types:
- RATE , Hect/Hr.
- Time in Run mode.
- Time in Hold mode.
- Total job time.
- Max speed.
- Average Speed.
- Oil Temp.
- Time.
- Date.
- Area of current job.
- Distance or current job.
- Working machine width.
- Large speed number displayed
4: Delete the displayed total by holding down5or6 keys for 6 seconds.
5: Use the 6 key if the"Run Hold Mode" is "Keys", to switch the Field Mate
into and out of Hold.
6: Quick press "ON to Exit to Main Menu.
Page 17
Advertisement
