Advertisement
RATE FACTOR
RATE FACTOR
FLOOR FACTOR
Next screen is "SLOT OFFSET", this number is used by the
factory to set the correct amount of material driven from the
spreader. Relates to a single or double chain configured
machine.
For a Twin floor machine it is typically set to 2260.
If programed rate not delivering correct
weight per hect this number can force the
rate to uder or over deliver material for
the set rate.
How often the Field Mate backs the system
up when not moving. Typically 1 min.
PWM setting of the spinner when it is just
about to start moving. Helps with fast
starting the motors.
PWM setting of the chain when it is just
about to start moving. Helps with fast
starting the motors.
Name of this Spreader.
Distance floor travels for 1 rev of the
chain motor. During calibration in dump
mode if the spreader is under or over
delivering material use this nnuber to
bring weight measurement into line
Learns Spinner motor verse PWM setting.
Adds in fast start up.
Learns Chain motor verse PWM setting.
Adds in fast start up.
RPM constant. Used to calc the extact
motor RPM.
Oil Alarm setting. If oil temp exceeds this
temperature an alert message is displayed.
Page 13
Advertisement
