Advertisement
Defines how often the Spinner valve PWM
control is updated. Set to 2. Only used on
Single Floor system.
Displays the spinner speed for current job.
Defines Max Chain motor RPM.
Defines Max Spinner motor RPM.
Displays the distance in millimeters that
the door is open on the spreader for the
current job.
Displays the Spreading Rate for the
current job.
Displays the Product name for the current
job for the material being spread.
Number for spinner pulses that occur for
1 rev of the spinner motor.
Number for chain pulses that occur for 1
rev of the chain motor.
If Twin Floor system, here is where the
2nd chain pulse count is entered for 1 rev
of the chain motor.
Width of Spreader chain floor.
Density of the material currently being
spread.
Chain gearbox ratio.
Number of speed pulses to occur before
the system knows it has travelled the
PULSE DISTANCE.
Spinner RPM when in DUMP mode.
Page 12
Advertisement
