Obtaining Information From The Internet - Solar-Log 200 User Manual

Malfunctions
Performing a restart
1 Press the reset button e.g. with an open paper clip.
3 Release the reset button.
4 Wait until normal operation has recommenced and then close the

8.2.1 Obtaining information from the internet

You can also obtain support for operating the device or the settings on
our internet site under the following URL:
Here you will also find additional product information and manuals
available for download.
8.2.2 Informing a specialist technician
Should problems occur with the Solar-Log
remedied using them measures described, we recommend that you
contact your solar technician or our customer service.
The contact addresses for our customer service can be found on the
back of the envelope.
98 of 104
 LED 1 goes out.
 After approx. 5 seconds LED 1 illuminates again.
 After approx. 20 seconds LED 1 and LED 2 start to flash, the
device restarts with the set values.
cover.
Caution
Do not perform a restart by pulling out the power plug!
http://www.solar-log.com/en/service-support/technical-support.html
200
that are not able to be
200
Solar-Log User Manual