Malfunctions - Solar-Log 200 User Manual

8

Malfunctions

8.1 Status display for the LEDs
On the front side of the device in the lower left area there are four LEDs
that show the operating status of the device.
Depending on the operating status, LED 1, LED 2, and LED E can flash
quickly or slowly, be permanently illuminated or not be illuminated.
The red LED P indicates the power supply.
The LED E is generally not illuminated during normal fault-free
operation. If it is illuminated or flashing, this indicates that a system
malfunction has occurred.
Normal operation
Normal operation
LED 1
quickly
illuminated
off
200
Solar-Log User Manual
LED 2 LED E
quickly off
slow off
quickly off
Meaning
Max. 5 min.: Device starts
Import time via internet
Read configuration from inverter
Malfunctions
95 of 104