Table of Contents
Advertisement
4
Lift up on the two blue levers to lift the PCI riser assembly from the
chassis.
5
Remove any PCI add-in cards that are installed in the connector.
For instructions, see "Removing a PCI Add-in Card."
6
Push back on the blue release lever at the end of the riser
connector. While holding the lever back, push firmly on the other
edge of the board to disengage the board from the riser.
7
Follow the steps under "Installing a PCI Riser
a replacement riser connector.
8
Install the chassis cover. For instructions, see
Cover."
Connector"
to install
"Installing the Chassis
75
Advertisement
Table of Contents
