Table of Contents
Advertisement
64
18 Install the chassis cover. For instructions, see
Cover"
19 (Optional) Install the front bezel. For instructions, see
and Installing the Front Bezel."
20 Plug all peripheral devices and the AC power cable back into the
server.
Removing a Floppy Drive from the Converted
Hard Drive Bay
1
Observe the safety and ESD precautions at the start of this book.
2
Power down the server and unplug all peripheral devices and the
AC power cable.
3
Remove the chassis cover. For instructions, see
Chassis Cover."
4
Remove the front bezel if it is installed. For instructions, see
"Removing and Installing the Front Bezel."
4 Configuring the system
"Installing the Chassis
"Removing
"Removing the
Advertisement
Table of Contents
