Table of Contents
Advertisement
Feature
Options
Assert NMI
Disabled
on SERR
Enabled
Assert NMI
Disabled
on PERR
Enabled
Resume on
Stays Off
AC Power
Power On
Loss
Last State
FRB-2 Policy
Disable BSP
Do not dis-
able BSP
Retry on
Next Boot
Disable
FRB2 Timer
Late POST
Disabled
Timeout
5 minutes
10 minutes
15 minutes
20 minutes
Hard Disk
Disabled
OS Boot
5 minutes
Timeout
10 minutes
15 minutes
20 minutes
Help Text
If enabled, NMI is gener-
ated on SERR and logged.
If enabled, NMI is gener-
ated. SERR option needs
to be enabled to activate
this option.
Determines the mode of
operation if a power loss
occurs. Stays off, the sys-
tem will remain off once
power is restored. Power
On, boots the system after
power is restored.
This controls action if the
boot processor will be dis-
abled or not.
This controls the time limit
for add-in card detection.
The system is reset on tim-
eout.
This controls the time limit
allowed for booting an
operating system from a
Hard disk drive. The action
taken on timeout is deter-
mined by the OS Watch-
dog Timer policy setting.
129
Description
Grayed out if
"NMI on SERR" is
disabled.
"Last State" is
only displayed if
the Intel Man-
agement Mod-
ule is present.
When displayed,
"Last State" is
the default.
When set to
"Stays Off,"
"Power Switch
Inhibit" is dis-
abled.
"Disable BSP"
and "Do not dis-
able BSP" are
only displayed if
the Intel Man-
agement Mod-
ule is present.
Advertisement
Table of Contents
