Saab 900 Service Manual page 77

Heating and ventilation system, air conditioning system
854-65
i
5 Remove the rotor.
Tool: Puller8393274
Guide 8393282
Installation
1 Position the rotor in the compressor so that
the clutches electrical terminals are upper-
most when the compressor is installed.
Note
The three gu ides on the rotor wh ich shou Id be fit-
ted into the aperture in the compressor body.
2 Use drift 8393290 and a hammer to drive
home the rotor until it sits flush against the
compressor body.
Saab900