Detail Of Comparator Register - Toshiba TXZ Family Reference Manual

4.2. Detail of Comparator Register

4.2.1.
[CMPCR] (Comparator Control Register)
Bit Bit Symbol
31:2 -
1 CMPISEL
0 CMPEN
4.3. Detail of Digital to Analog Converter Registers
4.3.1.
[DA0CR] (Control Register)
Bit Bit Symbol
31:1 -
0 EN
4.3.2.
[DA0REG] (Converted Value Setting Register)
Bit Bit Symbol
31:8 -
7:0 DAC[7:0]
2017-10-11
After reset Type
0 R Read as "0"
Selection of analog input
0 R/W 0: AIN00
1: AIN01
COMP operation
0 R/W 0: Stop
1: Operating
After Reset Type
0 R Read as "0"
DAC operation
0 R/W
0: Stop
1: Operating
After Reset Type
0 R Read as "0"
Converted value setting:
Digital value corresponding to the analog output voltage value is
0x00 R/W
set. The output voltage is calculated with the following formula.
DAC0 = <DAC> × (VREFH - VREFL) / 256
12 / 14
Function
Function
Function
TXZ Family
Comparator
Rev. 1.0