Assign Ports To Multiple Port-Based Vlans - NETGEAR XS512EM User Manual

12- or 24-Port 10-Gigabit/Multi-Gigabit Switch Models XS512EM and XS724EM
The pop-up window closes.
8. Click the Apply button.
Your settings are saved.
The Basic Port-Based VLAN Group table displays.
9. Under each port to be added to a VLAN, enter the ID of the VLAN.
You can enter a VLAN ID from 1 to the maximum number of ports that your switch supports. If all the
VLANs share an uplink to the Internet or servers, enter all in the VLAN ID field for the port that you want
to use for the uplink.
Note If ports are members of the same LAG, you must assign them to the same VLAN.
10. Click the Apply button.
Your settings are saved.

Assign Ports to Multiple Port-Based VLANs

A port-based VLAN configuration lets you assign ports on the switch to a VLAN. The number of VLANs is
limited to the number of ports on the switch. In an advanced port-based VLAN configuration, you can assign
a single port to multiple VLANs.
By default, all ports are members of VLAN 1.
To assign ports to multiple port-based VLANs:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using
an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
4. Enter the switch password.
The default password is password. The password is case-sensitive.
The Switch Information page displays.
5. Select VLAN.
The Basic Port-Based VLAN Status page displays.
6. If this is the first time that you are accessing this page or if you are changing the VLAN assignment
method, select the Enable radio button and continue with
Otherwise, see Step
A pop-up window opens, informing you that the current VLAN settings will be lost.
7. Click the OK button.
9.
Use VLANS for Traffic Segmentation
Step 7.
26