NETGEAR XS512EM User Manual page 7

12- or 24-Port 10-Gigabit/Multi-Gigabit Switch Models XS512EM and XS724EM
The following table lists the front panel components from left to right. For detailed information about the
status LEDs, see Status LEDs
Table 1. Front panel components
Letter Description
A Power LED.
B Fan LED.
C Factory Defaults button (see
D Ethernet port LED descriptions (printed on the front panel).
E Model XS512EM. Ten RJ-45 10-Gig/Multi-Gig Ethernet ports numbered 1 through 10 that support 10G,
5G, 2.5G, 1G, and 100M and that provide two Ethernet port LEDs each.
Model XS724EM. Twenty-two RJ-45 10-Gig/Multi-Gig Ethernet ports numbered 1 through 22 that support
10G, 5G, 2.5G, 1G, and 100M and that provide two Ethernet port LEDs each.
F Model XS512EM. Two combo ports. You can use either ports 11T and 12T as 10-Gig/Multi-Gig Ethernet
ports for 10G, 5G, 2.5G, 1G, and 100M connectivity or ports 11F and 12F as SFP+ slots for optional fiber
or copper transceiver modules.
Ports 11T and 12T provide two Ethernet port LEDs each. Ports 11F and 12F provide two SFP+ slot LEDS
each. For information about the supported transceiver modules, see
Connectivity on page 9.
Model XS724EM. Two combo ports. You can use either ports 23T and 24T as 10-Gig/Multi-Gig Ethernet
ports for 10G, 5G, 2.5G, 1G, and 100M connectivity or ports 23F and 24F as SFP+ slots for optional fiber
or copper transceiver modules.
Ports 23T and 24T provide two Ethernet port LEDs each. Slots 23F and 24F provide two SFP+ slot LEDS
each. For information about the supported transceiver modules, see
Connectivity on page 9.
G SFP+ slot LED descriptions (printed on the front panel).
on page 8.
Use the Factory Defaults Button to Reset the Switch
Hardware Overview of the Switch
7
on page 56).
SFP Slots for Fiber or Copper
SFP Slots for Fiber or Copper