Motorola CLP446 User Manual page 16

Connecting a Wired Audio Accessory
Connect the wired audio accessory.
1. Turn the radio OFF.
2. Remove the accessory connector cover
(applicable on Bluetooth wireless technology
enabled models only).
3. Plug the audio accessory straight into the
accessory connector on the radio. Screw the
audio accessory plug into the connector until it
is tight and fully engaged with the connector.
4
English
4. Turn the radio ON. Press either the Battery
Status, Menu, or Volume Control button to
check for audio through the audio accessory.
Note: The CLP Series radios offer a variety of
audio accessories. For detailed Audio
Accessories List, please refer to
www.motorolasolutions.com
for information on approved accessories.
Lower the radio volume BEFORE placing
the audio accessory in or near your ear.