Pairing New Accessories To The Hub - Chuango AW1 Plus User Manual

Case 1:
Initial start and then arm.
Sleep after detecting human movement twice.

Pairing New Accessories to the Hub

There are two ways of pairing Accessories to the Hub – manually and via App.
Manual Pairing
To pair Accessories manually please follow the instructions below:
Remote Control and Sensors:
1. Press the Learn button at the back of the Hub
2. Press any button on the Remote Control or trigger the Sensor
Please note that pressing the Tamper Switch instead of triggering the Sensor will
register it as a 24 Hour Zone.
(Optional Accessory) Wireless Siren:
1. Press the Learn Button on the Siren
2. Arm the Hub via the App
Pairing from the App
To pair the Accessories via App, open the WiFi Alarm App, go to 'Accessory Setting'
and follow the instructions on the screen.
7
Case 2:
Press the test button and then arm.
3 minutes later
No human movement within 3 minutes
Switch from sleep to arm.