ThinkPad P50 User Manual page 151

6. Open the latches on both sides of the memory slot at the same time
module 2 .
7. Place the notched end of the new memory module toward the contact edge side of the memory slot.
Then insert the memory module into the slot at an angle of about 20 degrees
module downward until it snaps into place
slot and cannot be moved easily.
Attention: Do not touch the contact edge of the memory module. Otherwise the memory module might
get damaged.
2 . Ensure that the memory module is firmly installed in the
1
, and then remove the memory
1 . Pivot the memory
.
Chapter 9 Replacing devices
133