Table of Contents
Advertisement
40
2. Nominal capacitance: less than 16pF/ft
3. Nominal impedance: 100 ohms
4. Nominal attenuation: less than 11.5db
Automatic Selection of the Media Type
While the driver installs, it automatically detects the media type based on the type of cable
connected. Once you change the cable type, you must reinstall the driver to execute
auto-detect again.
If the driver cannot detect which cable is connected or whether a cable is connected,
look at cabling network driver (Ex. Modify net.cfg file parameters—force line
speed=10 or 100).
10/100 Auto – Negotiation (N-Way)
Depending on the hub or connected device, the LAN adapter can automatically run at the
appropriate speed, by using N-way, a feature that complies with the IEEE802.3 standard. It
also works with any of the other IEEE-compliant products.
5-6. Remote BOOT function
This function is available with the BIOS programming for indicated operation system. The
remote boot function allows the computer to boot up over the network, instead of using the
local operating system device. This enables the system to be a diskless workstation
environment.
The ENDAT-3201M Embedded CPU Board
Advertisement
Table of Contents
