Table of Contents
Advertisement
22
The ENDAT-3201M Embedded CPU Board
SDRAM Bank Interleave
This function is to enable / disable SDRAM Bank Interleave function. Choices:
Disabled / Enabled
Memory Hole
To enabled / disabled (default) the support of Memory Hole which is reserved for
ISA card.
AGP Read Synchronization
To enabled / disabled the AGP Read Synchronization function.
AGP Fast Write
This function allows enabling / disabling the AGP Fast Write function
AGP Aperture Size
This function allows adjusting AGP Aperture Size from 2MB to 256MB to
increased VGA performance.
AGP Master 1 W/S Write
Allows you to enable / disable the AGP Master Write with 1 wait state
AGP Master 1 W/S Read
To enable / disable the AGP Master Read with 1 wait state
PCI Delay Transaction
To enable / disable the AGP Fast Write function
USB Controller
To enable / disable the on board USB Port function
Choices: USB Port 0&1 / USB Port 2&3 / All USB Device
USB Device Legacy Support
To enable / disable the on board USB support device with
Choices: Disabled / No Mice / All Device
Port 64/60 Emulation
To enable / disable the on board USB to support Mouse under NT4.0.
The default setting is "Disabled", Choices: Enabled / Disabled
Advertisement
Table of Contents
