Table of Contents
Advertisement
36
5.
The Screen will appear VIA 4in1 driver setup screen, please press "NEXT" to
continue. Please follow the steps instructed by each screen for the installation
of the VIA 4in1 driver. Restart the system after the completion of the
installation.
6.
After installing the VIA 4in1 driver, please select VGA driver for install. The
system will request for "restart" after the completion of the driver installation.
7.
The Screen can be adjusted at Display properties after the installation of VGA
driver.
We strongly recommend using the 4in1 driver to install the system since the 4in1
driver will automatically detect / update the necessary drivers.
This driver will automatically detect and install the latest utilities as following:
IDE Bus master , VIA AGP Driver,
LAN Driver: Install the LAN driver for on-board LAN adapter. Please refer to Chapter 5,
Realtek 8139 LAN Driver Installation Procedure.
The
VGA Driver: Install the VGA driver for on-board AGP VGA adapter
Please download or check from VIA Web-site: www.via.com.tw if you prefer to install the drivers
individually or you need more information.
The ENDAT-3201M Embedded CPU Board
IRQ Routing Driver, VIA INF Driver
Advertisement
Table of Contents
