Details Of The Advanced Chipset Setup - Unicorn Electronics ENDAT-3201M User Manual

User's Manual

3-4. Details of the Advanced Chipset Setup

Advanced Chipset Setup
******** DRAM Timing ********
Configure SDRAM Timing by SPD
DRAM Frequency
SDRAM CAS# Latency
DRAM Bank Interleave
Memory Hole
AGP Read Synchronization
AGP Fast Write
AGP Aperture Size
AGP Master 1 W/S Write
AGP Master 1 W/S Read
PCI Delay Transaction
USB Controller
USB Device Legacy Support
Port 64/60 Emulation
Configure SDRAM Timing by SPD
SPD (Serial Presences Detect) is a device in memory module for storing the module
information such as DRAM timing and chip parameters. If this option is enabled,
BIOS will access SPD automatically to configure module timing. If disabled,
DRAM timing can be configured manually.
SDRAM Frequency
Allows you to set the SDRAM frequency with user set by SPD Disable.
<Choices: 66MHz / 100MHz / 133MHz>
Caution: Improper setting will cause unpredicted result
SDRAM CAS# Latency With SDRAM Timing by SPD disabled, you can
select
The SDRAM CAS# (Column Address Strode) latency manually. Choices:
2 Clocks; 3 Clocks
21
Enabled
133Mhz
3
Enabled
Disabled
Enabled
Enabled
128MB
Disabled
Disabled
Enabled
All USB Port
All Device
Disabled