Unicorn Electronics ENDAT-3201M User Manual page 31

25
User's Manual
Serial Port IRQ
This option specifies the IRQ used by the serial port.
The default settings are (IRQ)3, (IRQ)4, (IRQ)9 and (IRQ)10.
Onboard AC' 97 Audio
This function is to disable or enable AC'97 Audio. Choices: Auto; Disabled
Onboard Legacy Audio
This function allows configuring the Audio Codec to support legacy Sound Blaster
mode. Choices: Auto; Disabled
Sound Blaster
This option is to Enable / Disable the onboard Audio support Sound Blaster
decoding.
SB I/O Base Address
To configure the Sound Blaster decoding I/O range.
Choice: 220h, 240h, 260h, 280h
SB IRQ Select
To configure Sound Blaster IRQ channel.
Choice: 5,7 and 10
SB DMA Select
To configure Sound Blaster DMA channel.
Choice: 0,1,2 and 3
MPU-401
This option is to Enable / Disable onboard MIDI port decoding.
MIPU-401 I/O Address
If the onboard MPU-401 port is "Enabled", it allows to set at 300h/310h/320h or
330h.
Game Port (200h-207h)
This option allows configuring onboard Game port address. The choices: Disabled;
200h; 207h