Product Description; General - BOON EDAM THT-100 Operation, Installation, And Maintenance Manual

THT-100
6

3 Product description

3.1 General

The THT-100 Full Height Turnstile is available in a variety of models and configurations
consisting of a central rotor assembly, Shield Assembly, Barrier and Top Channel Mechanism.
The rotor assembly turns on a central axis preventing passage through the Barrier while
allowing authorized entry/exit through the Shield Assembly passage of the turnstile. Size of the
turnstile can vary but is typically small enough to discourage two persons passing the THT-100.
The typical sizes of a 25" (50cm) width rotor arm, result in a capacity of 25 to 30 persons per
minute in one direction, depending on the authorization system chosen.
A variety of surface finishes are available in galvanized, powder coat and stainless steel,
aluminium anodized and even a combination of metals such as aluminium and stainless steel
together.
All described components are provided in the THT-100 unless otherwise noted with an asterisk
(*) as optional equipment or versions. The THT-100 is a manually operated product,
actuated/controlled by an integrated Main Control Board (MCB) located in the Top Channel
Assembly Mechanism.
Figure 3-1: THT-100
Boon Edam Inc.
402 McKinney Parkway Version: Rev A6 10/28//2011
Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA