BOON EDAM THT-100 Operation, Installation, And Maintenance Manual page 28

Installation and Maintenance Manual
27
Top Channel Direction Alignment
When setting the top channel on top of the ceiling plate, shield, and barrier post, it is necessary
to verify that the top channel is positioned properly. An alignment roll pin in the top channel
assembly shaft should set into the alignment guide of the top flange assembly. Alignment of
these components will assure the proper resting position of the unit (Reference Figure 5.1 for
proper rest position example).
Alingment Roll Pin
ui
Alignment G de
Figure 5-12: Top Rotor Arm Assembly
Version : 10//28/2011
Issue : THT-100-IMM-USA REV A6