BOON EDAM THT-100 Operation, Installation, And Maintenance Manual page 34

Installation and Maintenance Manual
33
Access Control Integration
The Access Control System (ACS) connections are terminated to the X1 and X2 terminal strips
located inside the main control box. The following integration connections are available:
Terminal Strips
X1 Terminal Strip
• AG2 - Access Grant CW
• AG1 - Access Grant ACW
• FA 2 - Fire Alarm CW
• FA 1 - Fire Alarm ACW
X2 Terminal Strip
• HOME POS – Home Position
• SOL ACT SW1 – Solenoid Activation Switch 1
• SOL ACT SW2 – Solenoiod Activation Switch 2
• ROT DET SW 1 – Rotation Detection Switch ACW
• ROT DET SW 2 - Rotation Detection Switch CW
Version : 10//28/2011
Issue : THT-100-IMM-USA REV A6
MCB Control Board
X1 X2
Figure 5-19: Main Control Box
Transformer
Mains Power
Connector
Fuse Holder
Cable Glands
for ACS Wiring