BOON EDAM THT-100 Operation, Installation, And Maintenance Manual page 27

THT-100
ASTG CSTG and EL Rotor Arm Assembly (Option)
The rotor arms of the ASTG, CSTG, and EL units assemble in the same manner as the
standard THT-100 rotor arms and always include a two piece standard snap-in style infill pieces
(see figure 5.11)
Figure 5-10. Optional Rotor Arms, (CSTG and EL and ASTG)
Retainer Angle
Snap-in Infill
After the rotor arms are connected to the Top and Bottom Hub assemblies, connect the retainer
angle to the rotor arms using the m6 x70 HHCS bolts, lock washers and flat washers as shown
in Figure 2-5.
Boon Edam Inc.
402 McKinney Parkway
Tel. 910-814-3800 fax 910-814-3899
Figure 5-11 Rotor Arm Snap-in Infill
Hardware Used in this Process
Qty Part # Description
3 Varies Snap-in Infill Piece
6 Varies Retainer Angle Piece
15 HW M6 x 70 HHS Bolts
15 HW M6 Nuts
15 HW M6 Flat Washer
Version: Rev A6 10/28//2011
Issue: THT-100-IMM-USA
26