Control System - BOON EDAM THT-100 Operation, Installation, And Maintenance Manual

THT-100
12

3.8 Control System

The THT-100 Control Box is located in the upper Top Channel Assembly. Typical mains power
supplied to the control system is 110-230VAC (refer to project specific drawings and
specifications). Within the Control Box, the Main Control Board (MCB) is powered by a 24VAC
power supply system which actuates the locking solenoids which in turn allow the turnstile to
lock and unlock.
A one-way controlled THT-100 incorporates one MCB and related components (for the direction
of access control), and a two-way controlled THT-100 utilizes two MCB's and related
components (one set for each direction of access control).
Locking
Solenoids
Control Box
with MCB(s)
Figure 3-11: Top Channel Assembly
The MCB(s) and Solenoids are located within the control box and typically are stacked on top of
each other as shown in Figure 3.8.
Figure 3-12: MCB Stack Assembly
Boon Edam Inc.
402 McKinney Parkway Version: Rev A6 10/28//2011
Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA