Advertisement
Errors
Error messages tell you when there is a problem in the bike's operation:
A9
Error Message
F
Maintenance Alert icon flashes
Refer to the Troubleshooting section of this manual. To go to the Service Mode menu, push the AVG/END and STAGE buttons
and hold for 5 seconds. The LCD display is different for Errors that occur during a non-Service Mode (ex: Workout Mode) and
Errors during Service Mode.
Wireless Bike Sensor Data
The console gets bike operation data from the bike's sensors and uses the data to calculate workout results. The console and
wireless sensors can transmit data after the Device Pairing process sets up their wireless connection. The Configuration/Service
Mode section of this manual gives the Device Pairing procedure. It is easiest to set up Device Pairing before you initially install
the console and sensors on the bike.
Bike Speed Sensor
The Schwinn® MPower™ Console comes with a speed sensor for the bike. The speed sensor transmits data from the flywheel
to the console during the workout.
Refer to the Schwinn® MPower™ Console Installation Guide for the procedure to install the speed sensor on the Schwinn
A.C.™ bike.
Power Sensor
The MPower™ Power sensor is an optional upgrade for a Schwinn A.C.™ bike with a Schwinn® MPower™ Console. The power
sensor transmits data from the Brake resistance mechanism to the console during the workout.
Refer to the Schwinn® MPower™ Power Upgrade Installation Guide for the procedure to install the power sensor on the
Schwinn A.C.™ bike.
8 8 8
Advertisement
