Advertisement
Standard EM 5kHz Pulse
The console uses the EM (electromagnetic) 5kHz pulse wireless protocol to read heart rate data from standard heart rate monitors
(HRMs), such as a Polar® transmitter chest strap.
Workout Data Storage
The console sends workout data to the user's data storage device—for example, a USB flash memory device or a sport watch. The
console can also get user data from an Ant+ sport watch and use the data to calculate workout results.
Ant+ Sport Watch
The Ant+ Sport Watch shares user data with the console after proximity linking occurs during User Setup. In User Setup Mode the
Ant+ Sport watch sends data (including user weight) to the console. During Workout Mode the console sends workout data to the
Ant+ Sport Watch. When proximity linking is complete, the watch and console can send and read data up to 118" (3 m).
USB Interface / Data Storage
The console can upload workout data to a USB data storage device if the USB port on the console is enabled. To enable the USB
port, go to the Service Mode menu. You can connect the USB storage device to the console during User Setup or after the
workout ends.
During Workout Mode the console sends these workout data to the USB device:
• • •
Workout (total) — Time, Distance, and average and maximum Speed, Watts, HR and RPM.
• • •
Workout Stages — Time, Distance, and maximum Speed, Watts, HR and RPM.
If you connect the USB device after the workout ends, the console only sends the Total Summary data to the USB device.
The USB port also gives access to the Service Technician to export console system data to a USB storage device and to update
the console firmware.
LCD Display Data
5 5 5
Advertisement
