Table of Contents
Advertisement
Category
Description
in.(52mm))
Gland
In the system, the laser beam light runs through the optical cable.
The exposure of the laser beam on worker's eye may cause serious injury so that it
should be handled with care.
Remove the dust cap of the optical connector before connecting.
- Before connecting the optical cable, check if the ferrule of the connector is soiled.
Be careful to keep the cutting section away from dust or foreign material. If the cable
is soiled with foreign material, do not blow to remove them.
- Make sure to clean the connector in accordance with the cleaning directions in
Annex.
- Do not touch the ferrule at the end of optical cable because it is easy to be damaged.
[Before Removing Dust Cap]
RFD01F Series Installation Manual v1.0
© Samsung Proprietary and Confidential
Bayonet Connector
Dust Cap
Chapter 3 Connecting Cables
Ferrule
[After Removing Dust Cap]
Water Proof Cap
61
Advertisement
Table of Contents
