Table of Contents
Advertisement
After Installing
Remove any debris produced during the work and clean up the installation site.
In the system, the laser beam light runs through the optical cable. Handle the
optical cables with care as the laser beam can seriously damage the worker's eyes.
Make sure that worker does not damage installed cables while cleaning the system.
While cleaning the power supply device, take caution that the device does not come
in contact with foreign objects that may cause power failure.
Installation Tools
The basic tools for installation are listed in the table below. The additional tools
required for each site need to be identified and prepared during a site survey before
starting installation.
Table 2. Basic Installation Tools
No.
Name
1
Torque Driver
2
Screw Driver Bit
3
Screw Driver
4
Torque Wrench
5
Adjustable Torque Wrench
6
Torque Wrench Spanner Head
RFD01F Series Installation Manual v1.0
© Samsung Proprietary and Confidential
Specification
Apply a torque range
: 10~50 lbf.in.
'+', No. 1
'+', No. 3
'+', No. 1
'+', No. 3
Apply a torque range
: 10~50 lbf.in.(30~150 kgf·cm)
Apply a torque range
: 100~400 lbf·in (100~500 kgf·cm)
Apply a torque range
: 10~50 lbf.in.(30~150 kgf·cm)
Hexagon Head: 0.39 in.(10 mm)
Chapter 1 Before Installation
Purpose of use
For fastening M6 Screw fixing
For fastening Power Connector
For fastening M6 Screw fixing
For fastening Power Connector
For fastening M6 Screw fixing
For fastening M6 Hex. Bolt
For fastening M10 Hex. Bolt/Nut
For fastening DIN Type
Connector
For fastening Optic Cable
Adapter
For fastening M6 Hex. Bolt
5
Advertisement
Table of Contents
