Interface Cable Connection; Remove/Insert Optic Module; Figure 48. Optic Module Removal (1); Figure 49. Optic Module Removal (2) - Samsung RFD01F series Installation Manual

Interface Cable Connection

Remove/Insert Optic Module

If the optic module needs to be removed or inserted before connecting the cable,
follow the below process.
1

Figure 48. Optic Module Removal (1)

[System Inside]
Optic Module
2

Figure 49. Optic Module Removal (2)

Transceiver
3

Figure 50. Optic Module Removal (3)

RFD01F Series Installation Manual v1.0
© Samsung Proprietary and Confidential
To remove Optical Module
Hang the jig hook on the optic module's bail within the system.
Optic
Connector
Completely remove the optic module from the transceiver by pulling the jig.
Optic Module
Remove the optic module and the jig by pressing the jig's hook grip.
Chapter 3 Connecting Cables
Jig
[Front View]
Jig
(Hook)
Location to hang the Jig
Jig
Bail
59