PROBEplus Instruction Manual FEATURES The Klein Tools PROBEplus is a professional series tone tracer for wire tracing and cable identification. It features digital volume control and a loud built-in speaker to assist you in tracing and identifying wire. • Tap power button to toggle on/off: continuously holding down the power button is optional.
Page 3
Adjust the volume until the detect LED just turns on or off. This sets the sensitivity of the detect LED. Hold the tip of the PROBEplus near the cables to be identified. The signal will be loudest on the wire or cable with the generator attached to it.
REpLAcING THE pRoBE TIp The probe tip can be replaced if it is worn out or damaged with PROBEplus Probe Replacement Tip Cat. No. VDV999-065 Loosen the screw on the back of the probe nearest to the probe tip using a #1 Phillips screwdriver.
Page 5
DISpoSAL / REcycLE Do not place equipment and its accessories in the trash. Items must be properly disposed of in accordance with local regulations. Looking for dependable automotive tools? Rely on Klein Tools for quality and long-lasting products.