Motorola ASTRO XTLTM 5000 User Manual page 28

Tone Type
Continuous,
low-pitched
tone
Brief tone
Brief low-
pitched tone
Single, short,
high-pitched
tone
Single, low-
pitched tone
Unique
chirping
sound
8
Name
Illegal Mode
Volume-Set
Tone
Time-Out Timer
Warning
Valid Key
Invalid Key
Dynamic
Reprogram-
ming
Description
Indicates that you have entered a mode
where normal system traffic will be
missed, or you are attempting something
which is not allowed. Examples include:
forgetting to exit the telephone
interconnect mode after a call ends (fleet
and subfleet calls cannot be received),
attempting to transmit on a receive-only
conventional mode, attempting to select
a dynamic mode where no dynamic ID
assignment has been made.
Indicate the volume level when you
press the Vol rocker button on a quiet
channel (W5, W7, and W9 control heads
only).
Indicates that your present transmission
will soon be disabled.
Indicates that you pressed a valid key, or
you entered a feature configuration
state, or you are receiving or
transmitting in the clear mode on secure
models (with TX Clear Alert Tones
enabled).
Indicates that you tried to make an
invalid key press, or that an emergency
alarm, reprogram request, or status/
message was not acknowledged.
Indicates that a dynamic ID is assigned.
Introduction