Table of Contents
Advertisement
Troubleshooting -
Problem
Cannot pair or connect
Mazda Bluetooth Audio
Transmitter to Bluetooth Kit.
No iPod/Mobile A2DP audio
can be heard.
No iPod functionality
through Bluetooth Kit.
Cannot adjust volume from
iPod
Problem is still present.
14
Bluetooth Mobile Phone Kit Owner's Manual
A2DP
Cause and Solution
1.
Ignition is turned off. Turn on the ignition.
2.
Mazda Bluetooth Audio Transmitter pairing time
expired. Reset Mazda Bluetooth Audio Transmitter by
disconnecting it from the iPod and repeat pairing
procedure.
3.
Another A2DP device is already connected to the
Bluetooth kit. Hold down the '-' button on the
microphone until a tone is heard. Redo pairing
procedure.
4.
iPod battery low. Connect the charging cable. Redo
pairing procedure.
1.
Ignition is turned off. Turn on the ignition.
2.
Volume is on mute or set to low. Adjust volume on
vehicle's audio system.
3.
iPod battery low. Connect the charging cable. Redo
pairing procedure.
4.
Mazda Bluetooth Audio Transmitter is not connected
to Bluetooth kit, re-connect Transmitter.
5.
Radio is not set to Auxiliary input. Set radio to Auxiliary
input.
6.
iPod is paused. Press play button.
7.
Another media device is connected to the vehicle
AUX IN jack. Remove any plug from vehicle AUX IN
jack.
1.
Bluetooth phone is connected and active/in call.
iPod functionality is not present when phone is
active/in call.
2.
Bluetooth remote control profile is connected to
phone instead of dongle. Hold the '-' button down
on the microphone until a tone is heard. Redo pairing
procedure.
1.
Volume from Mazda Bluetooth Audio Transmitter is
fixed. Adjust volume from vehicle's audio system.
Refer to your Authorised Mazda Dealer, or call Lumen
Australia on (03) 87871000 for further information.
Owner's Manual Part No: MZDA-A2DP-OM
Advertisement
Table of Contents
