Connecting/Pairing - Mazda A2DP Owner's Manual

Bluetooth Mobile Phone Kit Owner's Manual

Connecting/Pairing

Note: If connecting both a mobile phone and the Mazda Bluetooth Audio Transmitter to
the Bluetooth kit, it is recommended that the phone is connected first.
When using a phone which can enable/disable Bluetooth profiles (such as
Blackberry) manually disable Audio Source (A2DP) and AV Remote Control
target (AVRCP) profiles when using the iPod Adaptor.
When the Mazda Bluetooth Audio Transmitter is not connected to the
iPod:
1. Switch on ignition.
2. Plug the Mazda Bluetooth Audio Transmitter into the iPod to begin the
pairing and connecting process.
3. While searching, the light on the adaptor will flash quickly. Once
connected the light will flash twice per second.
When Mazda Bluetooth Audio Transmitter is connected to iPod:
1. Switch ignition on.
2. Turn iPod on by pressing any button on the iPod.
3. Press the play button once to begin the pairing and connecting process.
4. While searching, the light on the adaptor will flash quickly. Once
connected the light will flash twice per second.
Important It is dangerous and may be illegal to use a hand-held mobile phone
when you are driving. Always pull over to the side of the road (when
safe to do so) before answering or making a call with a hand-held
mobile phone.
Owner's Manual Part No: MZDA-A2DP-OM 11