Functions; System Reset - Mazda A2DP Owner's Manual

Functions

All functionality can be done through the iPod itself however the
following functions can also be done through the microphone:
Previous Track
Next track
Pause
Play
The radio has to be set to AUX mode in order for the music to be heard.
Note: Connecting any other media device to the vehicle AUX IN jack will
deactivate A2DP streaming.
When using Partially Compatible Nokia phones together with the Mazda
Bluetooth Audio Transmitter, the phone's Bluetooth connection may be lost
when keypad tones or error tones are sounded. It is recommended to disable
any tones and limit the phone usage while connected to the Bluetooth kit. To
reconnect manually, enable the connection via the handset.

System Reset

If the Bluetooth Mobile Phone Kit is experiencing issues with operation or
connection, you can perform a System Reset to restore it to the factory
settings.
1. Switch on the ignition. Ensure the radio is switched ON.
2. Hold the Bluetooth button for 12 seconds.
3. At 10 seconds, the radio will 'mute'. At 12 seconds, the radio will 'mute'
again confirming the reset is complete.
Note: It is also recommended to delete any Bluetooth connections from your
mobile phone and connect to the device again. Refer to 'Setting Up Your
Mobile Phone (Pairing)' on page 6 of this manual and your mobile
phone's owner's manual.
12
Bluetooth Mobile Phone Kit Owner's Manual
- Short Press '-' button on Bluetooth microphone.
- Short Press '+' button on Bluetooth microphone.
- Long Press '-' button on Bluetooth microphone.
- Long Press '+' button on Bluetooth microphone.
Owner's Manual Part No: MZDA-A2DP-OM