Download
Share
Print this page
Mazda MX-5 Miata 2005 Manual
  1. Manuals
  2. Brands
  3. Mazda Manuals
  4. Automobile Accessories
  5. 2005 Miata MX-5
  6. Manual
Mazda MX-5 Miata 2005 Manual

Mazda MX-5 Miata 2005 Manual

Hide thumbs Also See for MX-5 Miata 2005:

Advertisement

Quick Links

Download this manual
COWL GRILLE REMOVAL/INSTALLATION
1. Remove the windshield wiper arm and blade. (See WINDSHIELD WIPER ARM AND BLADE
REMOVAL/INSTALLATION .)
2. Remove in the order indicated in the table.
Fig. 1: Removing Cowl Grille
Courtesy of MAZDA MOTORS CORP.
3. Install in the reverse order of removal.
BELTLINE MOLDING REMOVAL/INSTALLATION
1. Remove the rear package trim.
2. Remove the set plate.
3. Remove the bolts.
4. Remove the beltline molding.
2005 Mazda MX-5 Miata
2005 Mazda MX-5 Miata
2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata
2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata
2005 ACCESSORIES & EQUIPMENT
Exterior Trim - MX-5 Miata

Advertisement

loading

Related Manuals for Mazda MX-5 Miata 2005

Summary of Contents for Mazda MX-5 Miata 2005

  • Page 1 1. Remove the windshield wiper arm and blade. (See WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION .) 2. Remove in the order indicated in the table. Fig. 1: Removing Cowl Grille Courtesy of MAZDA MOTORS CORP. 3. Install in the reverse order of removal. BELTLINE MOLDING REMOVAL/INSTALLATION 1. Remove the rear package trim.
  • Page 2 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 2: Removing Beltline Molding Courtesy of MAZDA MOTORS CORP. 5. Install in the reverse order of removal. FRONT BELTLINE MOLDING REMOVAL/INSTALLATION 1. Remove the screws. 2. Pull front beltline molding upward to disengage the clips from the body and remove it.
  • Page 3 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 3: Removing Front Beltline Molding Courtesy of MAZDA MOTORS CORP. 3. Install in the reverse order of removal. REAR WINDOW MOLDING REMOVAL DETACHABLE HARDTOP 1. Pull the rear window molding to remove it.
  • Page 4 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 4: Removing Rear Window Molding Courtesy of MAZDA MOTORS CORP. REAR WINDOW MOLDING INSTALLATION DETACHABLE HARDTOP 1. Apply protective tape along the edge of the body to protect it from damage.
  • Page 5 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 5: Cutting Sealant Using Razor Courtesy of MAZDA MOTORS CORP. 3. Insert the blade of the SST (Sealant Remover) into the sealant, and pull on the bar to cut the sealant near...
  • Page 6 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 6: Cutting Sealant Near Body Courtesy of MAZDA MOTORS CORP. 4. Insert the blade of the SST (Sealant Remover) into the sealant, and pull on the bar to cut the sealant near the glass as shown.
  • Page 7 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 7: Cutting Sealant Near Glass (1 Of 2) Courtesy of MAZDA MOTORS CORP. 6. Carefully clean around the edge of the glass and the adhesion surface of the body. CAUTION: Keep the area free of dirt and grease, and do not touch the ...
  • Page 8 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 8: Cutting Sealant Near Glass (2 Of 2) Courtesy of MAZDA MOTORS CORP. 7. Apply primer onto the bonding area of the new rear window molding using a brush. Allow the primer to dry for approximately 30 minutes .
  • Page 9 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 9: Applying Primer Onto Bonding Area Of New Rear Window Molding Courtesy of MAZDA MOTORS CORP. 9. Reshape the sealant as shown if necessary.
  • Page 10 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 10: Reshaping Sealant Courtesy of MAZDA MOTORS CORP. 10. Install the rear window molding with the molding joint at the top. If the molding is too long, cut the excess molding 10 mm {0.39 in} inside the molding joint edge.
  • Page 11 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 11: Installing Rear Window Molding With Molding Joint At Top Courtesy of MAZDA MOTORS CORP.
  • Page 12 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 12: Identifying Joint Molding Edge Specification Courtesy of MAZDA MOTORS CORP. 11. Check for water leaks. If a leak is found, wipe the water off well and repeat the installation.
  • Page 13 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 13: Removing Windshield Molding From Windshield Courtesy of MAZDA MOTORS CORP. WINDSHIELD MOLDING INSTALLATION 1. Apply protective tape along the edge of the body to protect it from damage.
  • Page 14 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 14: Cutting Sealant Using Razor Courtesy of MAZDA MOTORS CORP. 3. Insert the blade of the SST (Sealant Remover) into the sealant, and pull on the bar to cut the sealant near...
  • Page 15 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 15: Cutting Sealant Near Body Courtesy of MAZDA MOTORS CORP. 4. Insert the blade of the SST (Sealant Remover) into the sealant, and pull on the bar to cut the sealant near the glass as shown.
  • Page 16 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 16: Cutting Sealant Near Glass Courtesy of MAZDA MOTORS CORP. 6. Carefully clean around the edge of the glass and the adhesion surface of the body. 7. Align the edge of the protector to the spot mark.
  • Page 17 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 17: Cleaning Around Edge Of Glass Courtesy of MAZDA MOTORS CORP. 8. Securely bond the protector to the body as shown. CAUTION: Keep the area free of dirt and grease, and do not touch the ...
  • Page 18 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 18: Bonding Protector To Body Courtesy of MAZDA MOTORS CORP. 9. Apply primer onto the bonding area of the glass, body, and new windshield molding using a brush. Use only glass primer on the glass and body primer on the body and molding. Allow the primer to dry for approximately 30 minutes .
  • Page 19 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 19: Apply Primer Onto Bonding Area Of Glass Courtesy of MAZDA MOTORS CORP. 11. Reshape the sealant as shown if necessary.
  • Page 20 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 20: Reshaping Sealant Courtesy of MAZDA MOTORS CORP. 12. Install the windshield molding before the sealant has hardened. 13. Align the center mark in the molding with the glass mark (A).
  • Page 21 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 21: Installing Windshield Molding Courtesy of MAZDA MOTORS CORP. 16. Push the sides of the molding onto the body, beginning from the bottom (D). SEALANT HARDENING TIME Temperature Surface hardening time Time required until vehicle can be put into service 5°C {41°F}...
  • Page 22 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 22: Identifying Molding Courtesy of MAZDA MOTORS CORP. CONVERTIBLE TOP REMOVAL/INSTALLATION 1. Cover both sides of the rear window glass with thick cloth to protect the window.
  • Page 23 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 23: Removing Convertible Top - With Torque Specifications Courtesy of MAZDA MOTORS CORP. 6. Install in the reverse order of removal. CONVERTIBLE TOP REMOVAL NOTE 1. Unlock the top lock.
  • Page 24 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 24: Inserting Rain Rail Into Beltline Molding Lip Courtesy of MAZDA MOTORS CORP. 2. Align and install the link bracket over the studs with no clearance between the studs and the bracket.
  • Page 25 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 25: Installing Link Bracket Over Studs Courtesy of MAZDA MOTORS CORP. CONVERTIBLE TOP DISASSEMBLY/ASSEMBLY 1. Disassemble in the order indicated in the table.
  • Page 26 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 26: Disassembling Convertible Top - With Torque Specifications Courtesy of MAZDA MOTORS CORP. 2. Assemble in the reverse order of disassembly. RETAINER DISASSEMBLY NOTE 1. Set the convertible top upside down on a workbench covered with clean, thick cloth.
  • Page 27 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 27: Disassembling Retainer Courtesy of MAZDA MOTORS CORP. END PLATE DISASSEMBLY NOTE 1. Remove the rivets from the link using a drill. Drill size 4.0 mm diameter {0.16 in diameter}...
  • Page 28 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 28: Disassembling End Plate Courtesy of MAZDA MOTORS CORP. TOP FABRIC DISASSEMBLY NOTE 1. Fold the convertible top. 2. Remove the top fabric from the link.
  • Page 29 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 29: Removing Top Fabric From Link Courtesy of MAZDA MOTORS CORP. CABLE DISASSEMBLY NOTE 1. Peel back the top fabric from the front header. 2. Remove the screws and disconnect the cables from the rear of the link.
  • Page 30 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 30: Disconnecting Cables From Rear Of Link Courtesy of MAZDA MOTORS CORP. 4. Remove the rivets from the link using a drill. Drill size 4.0 mm diameter {0.16 in diameter}...
  • Page 31 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 31: Removing Rivets From Link Courtesy of MAZDA MOTORS CORP. 6. Remove the top fabric from the bow retainer. Fig. 32: Removing Top Fabric From Bow Retainer...
  • Page 32 7. Remove the cables from the cable guide. 8. Remove the top fabric and cables from the link. Fig. 33: Removing Top Fabric And Cables From Link Courtesy of MAZDA MOTORS CORP. 9. Remove the cables from the top fabric.
  • Page 33 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 34: Removing Cables From Top Fabric Courtesy of MAZDA MOTORS CORP. CABLE ASSEMBLY NOTE 1. Thread the cable into the top fabric.
  • Page 34 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 35: Threading Cable Into Top Fabric Courtesy of MAZDA MOTORS CORP. TOP FABRIC ASSEMBLY NOTE 1. Cover the workbench with thick cloth to prevent damaging the top fabric and rear window.
  • Page 35 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 36: Installing Top Fabric To Front Bow Courtesy of MAZDA MOTORS CORP. 4. Roll the top fabric over the bow retainer. 5. Hang the end of the top fabric on the bow retainer.
  • Page 36 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 37: Assembling Top Fabric To Bow Retainer Courtesy of MAZDA MOTORS CORP. 6. Clamp the top fabric to the bow using water pump pliers which have been wrapped in tape. Pull the top fabric by hand to verify that it is held securely.
  • Page 37 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 38: Clamping Top Fabric To Bow Courtesy of MAZDA MOTORS CORP. 8. Rivet the cables to the front of the link.
  • Page 38 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 39: Riveting Cables To Front Of Link Courtesy of MAZDA MOTORS CORP. SET PLATE ASSEMBLY NOTE 1. Turn the convertible top over and fold it. 2. Install the front of the top fabric to the front header.
  • Page 39 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 40: Installing Set Plate To Link Courtesy of MAZDA MOTORS CORP. END PLATE ASSEMBLY NOTE 1. Unfold the convertible top half-way. 2. Pass the cables through the cable guides.
  • Page 40 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 41: Installing Cables To Rear Of Link Courtesy of MAZDA MOTORS CORP. 5. Install the top fabric to the link. 6. Unfold the convertible top. 7. Install the end plates to the link.
  • Page 41 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 43: Riveting Top Fabric To Link Courtesy of MAZDA MOTORS CORP. RETAINER ASSEMBLY NOTE 1. Install the retainers to the link, aligning the retainer marks with the retainer installation screws.
  • Page 42 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 44: Installing Retainers To Link Courtesy of MAZDA MOTORS CORP. CONVERTIBLE TOP ADJUSTMENT 1. Lift the protector away from the top lock adjusting nut. 2. Turn the adjusting nut clockwise to decrease clearance A and height B; turn the nut counterclockwise to increase them.
  • Page 43 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 45: Adjusting Convertible Top Courtesy of MAZDA MOTORS CORP. 3. Secure the adjusting nut with the protector. RETAINER ADJUSTMENT 1. Remove the weatherstrip. 2. Loosen the retainer installation screws and adjust the retainer as necessary.
  • Page 44 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 46: Adjusting Retainer Courtesy of MAZDA MOTORS CORP. TOP FABRIC REMOVAL/INSTALLATION 1. Cover over the rear deck area using a protective rag. 2. Remove the rear package trim.
  • Page 45 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 47: Removing Top Fabric - With Torque Specifications Courtesy of MAZDA MOTORS CORP. 4. Install in the reverse order of removal. WEATHERSTRIP REMOVAL NOTE Vertical section 1.
  • Page 46 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 48: Removing Fastener Courtesy of MAZDA MOTORS CORP. RETAINER REMOVAL NOTE 1. Mark around the retainer installation screws with paint before removing them.
  • Page 47 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 49: Marking Around Retainer Installation Screws Courtesy of MAZDA MOTORS CORP. TOP FABRIC REMOVAL NOTE 1. Remove the rivets from the link with a drill. Drill size 4.0 mm diameter{0.16 in diameter}...
  • Page 48 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata 4.0 mm diameter{0.16 in diameter} Fig. 50: Removing Rivets From Link Using Drill Courtesy of MAZDA MOTORS CORP. 4. Lower the convertible top to release the cable spring tension, and unhook the spring.
  • Page 49 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 51: Removing Rivets From Link Using Drill Courtesy of MAZDA MOTORS CORP. 5. Remove the cable from the top fabric. 6. Pry back the front bow retainer using a tape-wrapped flathead screwdriver.
  • Page 50 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 52: Identifying Cable Spring And Screw Courtesy of MAZDA MOTORS CORP. 7. Remove the top fabric from the bow retainer.
  • Page 51 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 53: Removing Top Fabric From Bow Retainer Courtesy of MAZDA MOTORS CORP. RAIN RAIL REMOVAL NOTE 1. Remove the rivets from the top fabric using a drill.
  • Page 52 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata...
  • Page 53 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 54: Removing Rivets From Top Fabric Using Drill Courtesy of MAZDA MOTORS CORP. RAIN RAIL INSTALLATION NOTE If the rivets will not be used 1. Degrease the rain rail using white gasoline.
  • Page 54 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata 1. Rivet the rain rail to the top fabric. Fig. 56: Riveting Rain Rail To Top Fabric Courtesy of MAZDA MOTORS CORP. 2. Flatten the stem using a hammer.
  • Page 55 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 57: Flattening Stem Using Hammer Courtesy of MAZDA MOTORS CORP. TOP FABRIC INSTALLATION NOTE 1. Place the top fabric onto the link. 2. Install the top fabric from the rear bow to the front bow.
  • Page 56 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 58: Clamping Top Fabric To Bow Courtesy of MAZDA MOTORS CORP. 6. Pull the top fabric by hand to verify that it is held securely. 7. Insert a metal rod into the fabric as shown, tie the cable around the rod, and pull the cable through the fabric.
  • Page 57 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 59: Inserting A Metal Rod Into Fabric Courtesy of MAZDA MOTORS CORP. 9. Install the screw.
  • Page 58 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 60: Installing Screw Courtesy of MAZDA MOTORS CORP. 10. Rivet the top fabric upper side to the link. 11. Peel the top fabric end.
  • Page 59 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 61: Riveting Top Fabric Upper Side To Link Courtesy of MAZDA MOTORS CORP. 12. Rivet the top fabric lower side to the link. NOTE: If the lower side rivet is difficult to install to the link, install the top ...
  • Page 60 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 62: Riveting Top Fabric Lower Side To Link Courtesy of MAZDA MOTORS CORP. TOP FABRIC REPAIR HOLES 1. Place the repair sheet (NC10 R1 211) over the damaged section. Cut both the top fabric and the repair sheet using a razor and a straightedge.
  • Page 61 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 63: Placing Repair Sheet Over Damaged Section Courtesy of MAZDA MOTORS CORP. 3. Trim the top fabric and the repair sheets using scissors.
  • Page 62 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 64: Identifying Repair Sheets Courtesy of MAZDA MOTORS CORP. 4. Degrease the repair sheets using ethyl alcohol. 5. Apply a generous amount of adhesive agent (K180 W0 313) or equivalent to the section being repaired,...
  • Page 63 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 65: Degreasing Repair Sheets Using Ethyl Alcohol Courtesy of MAZDA MOTORS CORP. 6. Insert the repair sheet squarely into the section of the top fabric being repaired. Then install the back...
  • Page 64 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 66: Inserting Repair Sheet Squarely Into Section Of Top Fabric Being Repaired Courtesy of MAZDA MOTORS CORP. 7. Press the repair sheets firmly together.
  • Page 65 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 67: Pressing Repair Sheets Together Courtesy of MAZDA MOTORS CORP. 8. Let the top fabric stand until the adhesive agent is fully dry. TEARS 1. Cut a piece of repair sheet (NC10 R1 211) larger than the damaged section for use as a back repair sheet.
  • Page 66 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 68: Degreasing Repair Sheet Using Ethyl Alcohol Courtesy of MAZDA MOTORS CORP. 6. Let the top fabric stand until the adhesive agent is fully dry.
  • Page 67 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 69: Identifying Back Repair Sheet Courtesy of MAZDA MOTORS CORP. DETACHABLE HARDTOP DISASSEMBLY/ASSEMBLY 1. Disassemble in the order indicated in the table.
  • Page 68 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 70: Disassembling Detachable Hardtop Courtesy of MAZDA MOTORS CORP. 2. Assemble in the reverse order of disassembly. DETACHABLE HARDTOP ADJUSTMENT TOP LOCK 1. Lift the protector away from the top lock adjusting nut.
  • Page 69 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Clearance A:3-7 mm {0.12-0.27 in} B:-2-2 mm {-0.07-0.07 in} 3. Secure the adjusting nut with the protector. Fig. 71: Adjusting Detachable Hardtop Courtesy of MAZDA MOTORS CORP.
  • Page 70 2. Turn the adjusting nut clockwise to tighten the striker and side lock engagement; turn the nut counterclockwise to loosen the engagement. 3. Secure the adjusting nut using the protector. Fig. 72: Adjusting Side Lock Courtesy of MAZDA MOTORS CORP. REAR DECK LOCK 1. Remove the screw and open the lock cover.
  • Page 71 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 73: Opening Lock Cover Courtesy of MAZDA MOTORS CORP. 2. Loosen the plate installation bolts. 3. Install the detachable hardtop to the body. 4. Move the plate right, left, fore, or aft until it is tight.
  • Page 72 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 74: Tightening Plate Courtesy of MAZDA MOTORS CORP. FRONT AIRDAM SKIRT REMOVAL (BP WITH TC) 1. Remove the screws and fasteners. 2. Remove the front airdam skirt while cutting away the double-sided adhesive tape using a flathead...
  • Page 73  gloves when using a cutter. Fig. 75: Removing Front Airdam Skirt (BP With TC) Courtesy of MAZDA MOTORS CORP. FRONT AIRDAM SKIRT INSTALLATION (BP WITH TC) WARNING: Using a cutter with bare hands can cause injury. Always wear gloves ...
  • Page 74 4. Install the front airdam skirt to the body. Fig. 76: Affixing Double-Sided Adhesive Tape To Front Airdam Skirt Courtesy of MAZDA MOTORS CORP. 5. Install fasteners A. 6. Install fasteners B and temporarily tighten the screws. 7. Completely remove the tape backing and press to adhere.
  • Page 75 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 77: Installing Front Airdam Skirt (BP With TC) Courtesy of MAZDA MOTORS CORP. REAR AIRDAM SKIRT REMOVAL (BP WITH TC) 1. Remove the fasteners, screws, and bolts.
  • Page 76 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 78: Removing Rear Airdam Skirt (BP With TC) Courtesy of MAZDA MOTORS CORP. REAR AIRDAM SKIRT INSTALLATION (BP WITH TC) WARNING: Using a cutter with bare hands can cause injury. Always wear gloves ...
  • Page 77 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 79: Affixing Double-Sided Adhesive Tape To Rear Airdam Skirt Courtesy of MAZDA MOTORS CORP. 4. Install the fasteners. 5. Install the rear airdam skirt to the rear bumper and temporarily install the screws.
  • Page 78 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 80: Installing Rear Airdam Skirt (BP With TC) - With Torque Specifications Courtesy of MAZDA MOTORS CORP. REAR SPOILER REMOVAL (BP WITH TC) 1. Remove the bolts and nut.
  • Page 79 2005 Mazda MX-5 Miata 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 81: Removing Rear Spoiler (BP With TC) Courtesy of MAZDA MOTORS CORP. REAR SPOILER INSTALLATION (BP WITH TC) WARNING: Using a cutter with bare hands can cause injury. Always wear gloves ...
  • Page 80 2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata Fig. 82: Affixing Double-Sided Adhesive Tape To Rear Spoiler Courtesy of MAZDA MOTORS CORP. 4. Install the rear spoiler to the trunk lid. 5. Completely remove the tape backing and press to adhere.