Frequency Navigation; Using The Dial; Using The Mh-48A6Ja Microphone; Channel Step Selection - Yaesu FTM-3200DR Operating Manual

Frequency Navigation

Using the Dial

Rotating the DIAL knob allows tuning in the
pre-programmed steps. Clockwise rotation
tunes the frequency upwards, whereas coun-
terclockwise rotation tunes the frequency
downwards.
r Press the [ MHz ( SETUP )] key momentarily,
then rotate the DIAL knob, to change the
frequency steps to 1 MHz per step.

Using the MH-48A6JA Microphone

Using the [ UP ] and [ DWN ] key:
Pressing [ UP ] momentarily, tunes the frequen-
cy upwards. Whereas pressing [ DWN ] momen-
tarily tunes the frequency in the downwards di-
rection.
Using the number keys:
Use the [ 0 ] to [ 9 ] number keys to directly input
the frequency.
There is no "decimal point" key on the MH-
48A6J keypad. However, there is a short-cut
for frequencies ending in zero:
press the [ # ] key after the last non-zero digit.
Examples: To enter 146.520 MHz, press [ 1 ] à [ 4 ] à [ 6 ] à [ 5 ] à [ 2 ] à [ 0 ]
To enter 146.000 MHz, press [ 1 ] à [ 4 ] à [ 6 ] à [ # ]

Channel Step Selection

The DIAL and microphone [ UP ] / [ DWN ] keys frequency tuning step can be changed.
Note: See Setup Menu Item "STEP 43" on page xx.
FTM-3200DR Operating Manual
Application for FCC / IC
FCC ID: K6620523X50 / IC: 511B-20523X50
Basic Operation
VOL
SQL REV D/A M H z
TXPO D W
SETUP
Number
keys
DIAL
V / M
M W
DWN
UP
15