Starting Warm Engine - Echo GT-225 Operator's Manual

Hide thumbs Also See for GT-225:
Table of Contents

Advertisement

OPERATION
Note: If engine does not start with choke in "RUN" position after 5
pulls, repeat instructions 2 - 5.
6.
Throttle Trigger
After engine warm-up, grip throttle handle and support handle. Gradually
depress throttle trigger to increase engine RPM to operating speed.

Starting Warm Engine

The starting procedure is the same as Cold Start except DO NOT close the
choke, and do not depress throttle trigger to wide open position.
The attachment should not move at idle, otherwise serious
personal injury may result.
Note: If attachment moves, readjust carburetor according to
"Carburetor Adjustment" instructions in this manual or see
your ECHO Dealer.
1.
Stop Switch
Move stop switch (A) away from
the STOP position.
2.
Purge Bulb
Pump purge bulb (C) until fuel is
visible and flows freely in the
clear fuel tank return line. Pump
bulb an additional 4 or 5 times.
22
A
© 10/2017 ECHO Inc.
GT-225
C
X7732273900

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents