Equipment - Echo GT-225 Operator's Manual

GT-225
Read the Manuals
• Provide all users of this equipment with the Operator's Manual and Safety
Manual for instructions on Safe Operation.
Clear the Work Area
• Spectators and fellow workers must be warned, and children and animals
prevented from coming nearer than 15 m (50 ft.) while the unit is in use.
Keep a Firm Grip
• Always hold throttle handle and support handle with thumbs and fingers
tightly encircling the handles.
Keep a Solid Stance
• Maintain footing and balance at all times. Do not stand on slippery,
uneven or unstable surfaces. Do not work in odd positions or on ladders.
Do not over reach.
• Avoid Hot Surfaces
• Keep exhaust area clear of flammable debris.
Avoid contact during and immediately after
operation.

Equipment

Use only ECHO attachments. Serious injury may result from the
use of a non-approved attachment combination. ECHO, INC. will
not be responsible for the failure of cutting devices,
attachments or accessories which have not been tested and
approved by ECHO. Read and comply with all safety
instructions listed in this manual and safety manual.
Check unit for loose or missing nuts, bolts, and screws.
◆
Tighten or replace as needed.
Inspect shield for damage and ensure that the cut-off knife
◆
is securely in place. Replace if either is damaged or
missing.
Check that the cutting attachment is firmly attached and in
◆
safe operating condition.
X7732273900
© 10/2017 ECHO Inc.
SAFETY
11