Lubrication; Troubleshooting - Echo GT-225 Operator's Manual

TROUBLESHOOTING

Lubrication

Level 1.
Parts Required:
1. Remove shield.
2. Loosen bearing housing locating screw (A), at the top of the housing,
loosen mounting screw (B) and remove gear case from drive housing.
3. Pull the flexible drive shaft (C)
from the drive housing, wipe
clean and apply 15 ml (0.5 oz.)
of grease.
4. Slide the flexible drive shaft
back in the drive housing being
careful not to get dirt on the
flexible drive shaft.
5. Install the bearing housing and
shield.
TROUBLESHOOTING
Fuel vapors are extremely flammable and may cause fire and/or
explosion. Never test for ignition spark by grounding spark plug
near cylinder plug hole, otherwise serious personal injury may
result.
32
Lithium Based Grease.
B
A
C
© 10/2017 ECHO Inc.
GT-225
X7732273900