Assembly; Shield Installation - Echo GT-225 Operator's Manual

ASSEMBLY

1 Echo Power Blend X
12 Pieces of pre-cut Nylon Line
1 Shield Assembly
ASSEMBLY

Shield Installation

Parts Required:
Cut-off knife on debris shield has sharp edges. Avoid contact
when installing or removing line head.
Wear Gloves or personal injury may result:
Cut-off knife is sharp.
◆
Gear case and surrounding area may be hot.
◆
1. Remove wing nut (A), washer
(B), and bolt (C).
2. Snap the shield over the
bearing housing.
3. Install bolt (C), washer (B), and
wing nut (A).
16
™
2-Stroke Oil Sample
Shield Assembly
B
A
© 10/2017 ECHO Inc.
GT-225
C
X7732273900