Ignition Contour Monster Beam 760 User Manual page 26

Operating
Operating hours display
Temperature display
Software version
Self test
Resetting the movable axes
26
Press [ENTER], then [UP] or [DOWN] until the display shows 'INFO' . Press [ENTER].
Press [UP] or [DOWN] until the display shows 'Time info' . Press [ENTER]. With the but‐
tons [UP] or [DOWN] you can select the value to be displayed:
'Power on' : Time since last power up
n
n 'Ttl Life Hrs' : Total operating hours
'Last Run Hrs' : Operating hours of last run
n
Press [ENTER]. The display shows the corresponding value in hours.
To end the display and return to the parent menu, press [ENTER].
Press [ENTER], then [UP] or [DOWN] until the display shows 'INFO' . Press [ENTER].
Press [UP] or [DOWN] until the display shows 'Temp info' . Press [ENTER]. The display
shows the temperature of the LEDs.
To end the display and return to the parent menu, press [ENTER].
Press [ENTER], then [UP] or [DOWN] until the display shows 'INFO' . Press [ENTER].
Press [UP] or [DOWN] until the display shows 'Software Ver' . Press [ENTER]. The soft‐
ware version of the device will now appear on the display.
To end the display and return to the parent menu, press [ENTER].
Press [ENTER], then [UP] or [DOWN] until the display shows 'TEST' . Press [ENTER]. With
[UP] or [DOWN] you can select the test to be performed:
n 'Test All' : Test of all functions
'Test Pan&Tilt' : Tests the motors for pan and tilt
n
'Test LED' : Tests the LEDs.
n
The selected test starts right away.
To end the running test and return to the parent menu, press [ENTER].
With this function, you can reset all movable axes to their home position.
Press [ENTER], then [UP] or [DOWN] until the display shows 'INTRO' . Press [ENTER].
Press [UP] or [DOWN] until the display shows 'Reset' . Press [ENTER].
Press [UP] or [DOWN] until the display shows 'Yes' . Press [ENTER]. The device now
performs a reset.
moving head