Ignition Contour Monster Beam 760 User Manual page 17

Selecting the operating mode Press [ENTER], then [UP] or [DOWN] until the display shows 'INTRO' . Press [ENTER].
Press [UP] or [DOWN] until the display shows 'Run' . Press [ENTER]. With the buttons
[UP] or [DOWN] you can select an operating mode:
'DMX512' : The device is controlled via DMX.
n
n 'Artnet' : The device is controlled via Art-Net.
'Auto 1' : Automatic show 1
n
'Auto 2' : Automatic show 2
n
'Sound1' : Sound-controlled automatic show 1
n
'Sound2' : Sound-controlled automatic show 2
n
'Slave' : The device is controlled by another device, which is configured as master.
n
'Static' : Static operation, all parameters of the device can be set individually.
n
When the display shows the desired value press [ENTER] to save the settings. Press
[MENU] to close the menu.
In the modes 'Sound1' , 'Sound2' , 'Auto 1' and 'Auto 2' , the device can serve as
master in a master-slave combination.
Contour Monster Beam 760
Operating
17