Table of Contents
Advertisement
Mounting options
Transport protection
The quick lock openings on the housing bottom are used for secure attachment of
Omega brackets. To these, the flight adapters (Half Coupler, Trigger Clamps, C-hooks,
etc.) are attached. The safety cable must be routed through the cut-outs on the
bottom of the housing.
A Fastening element with quick release openings
B Openings for safety cable
C Safety cable
The lever for the transport protection is located at the lower edge of the head carrier.
To enable the transport protection, switch the unit off, turn the head into a position
at right angles to the unit's base and engage the lever. To release the transport pro‐
tection, pull the lever back. The head carrier is then free to move again.
Contour Monster Beam 760
Installation
11
Advertisement
Table of Contents
